Star Destroyer (18)

Filter Close
View as
  • New
    Add to wishlist Quick view

    Security Holo Pedestal with Hologram

    £28.95 – £35.95
    This Imperial holo pedestal with a large hologram is a perfect fit for your new Star Destroyer diorama. The pedestal can be lit from inside the console using a small LED to make the screen glow. The Holo pedestal unit comes in 4 parts and will require assembly & painting. Printed in ABS-like grey resin with a frosted top screen and a large hologram figure or either Lord Vader, Emperor Palpatine or Master Yoda.
    • 85mm (H) x 70mm (L) x 63mm (W) at 12th scale
    Select options
  • New
    Add to wishlist Quick view

    Moff Tarkin Head Sculpt (12″, 6″ & 3.75″)

    £9.95 – £29.95
    Created specially by Paul Herbert this this detailed head sculpt of Moff Tarkin from the Star Wars movies is available in 18th (3.75"), 6th scale (12") or 12th scales (6"). Wilhuff Tarkin is a human male politician, bureaucrat, and military officer whose career spans the Fall of the Republic and the Age of the Empire. Born on the planet Eriadu in 64 BBY, he is a member of the Tarkin family and the great-nephew of Jova Tarkin. During the Republic Era, Tarkin served in the Galactic Republic's Judicial Department for a time before returning to his homeworld as the Governor of Eriadu. When the Clone Wars began, he renewed his military service, becoming a commissioned officer in the Republic Navy. Tarkin continued to rise in power with the proclamation of a new regime, the Galactic Empire, ruled by the self-appointed Emperor Palpatine. As governor of the regions of space along the galactic frontier, he seeks to enforce Imperial rule on restive worlds such as Lothal where rebel cells grew increasingly bold in their opposition to the Empire. This head sculpt has been printed in high quality flesh tone or grey ABS-like resin. Will require painting.
    Select options
  • New
    Add to wishlist Quick view

    Fretwork Panel Set – Imperial Design

    £37.95
    These precision lasercut wall fretwork panels are suitable for your next Imperial diorama. There are 9 panels in the pack - 3 square sections (60mm x 60mm) that can be used as either flooring grates or  wall sections. The 3 larger panels are 170mm tall and can be placed vertically or horizontally for whatever effect you wish. 3 smaller panels can be used as filler sections. 2mm thick cut from high grade MDF. Can be painted.
    Add to basket
  • Add to wishlist Quick view

    3 Round Flooring Grates

    £12.95 – £14.95
    These 3 lasercut round flooring grate panels are highly suitable for your 12th (6") or 18th scale (3.75") figure. 2mm thick cut from high grade MDF. Can be painted.
    Select options
  • New
    Add to wishlist Quick view

    3 Hexagonal Crates with decals

    £13.95 – £15.95
    Add to your next Imperial diorama this set of 3 Hexagonal crates from Star Wars. The boxes are printed in high quality 3D ABS-like resin and can be added to your own custom diorama base.
    • 12th scale = 80mm x 25mm x 32mm
    • 18th scale = 55mm x 17mm x 21mm
    • Waterslide Decal sheet (100mm x 70mm)
    Will require painting.
    Select options
  • Add to wishlist Quick view

    4 Boxes & Crates with decals

    £15.95 – £19.95
    Enhance your next Star Wars diorama with this reproduction 4 box crates from Galaxy's Edge in Disneyland, Florida. The boxes are printed in high quality 3D ABS-like resin and can be added to your own custom diorama base and also come with a set of custom decals to be applied.
    • Box 1 = 65mm x 33mm x 33mm
    • Box 2 & 3 = 33mm x 33mm x 33mm
    • Box 4 with Cylinders = 40mm x 52mm x 67mm
    • Waterslide Decal sheet (100mm x 50mm)
    Will require painting.
    Select options
  • Add to wishlist Quick view

    12 Imperial Technical Control Panels

    £20.95 – £35.95
    A set of 12 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you.
    Select options
  • Add to wishlist Quick view

    2X-3KPR Servant Droid

    £21.95 – £26.95
    The 2X-3KPR is an excellent servant droid manufactured by Lerrimore Droids. The 2X-3KPR is normally responsible for patrolling around the perimeter of a homestead, and is programmed to activate alarm sensors, security lights, and power fences. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey and clear resin, the SW-2X3KPR droid will require assembly and painting.
    Select options
  • Add to wishlist Quick view

    PLNK Power Droid

    £18.95 – £24.95
    PLNK-series power droids, nicknamed "plunk droids" for their distinctive vocalizations, are four-legged power droids manufactured by Industrial Automaton during the Clone Wars. They function as containment and refueling units for liquid tibanna gas, which they equipped various starships and equipment with. Programmed with simple artificial intelligence so they can understand rudimentary commands, the droids serve the Republic Navy, working aboard Venator-class Star Destroyers; as well as the Confederacy of Independent Systems. They have a slow moving pace, weighed down by a heavy internal tibanna tank and generator. A single unit carries an internal pump for loading and discharging liquid tibanna through its externally mounted hose and nozzle. PLNK-series units are also used on Republic-affiliated worlds such as Coruscant, Rodia, and Mandalore. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting. Does not come with hose.
    Select options
  • Add to wishlist Quick view

    Mouse Droids (2-Pack)

    £7.95 – £8.95
    A set of 2 MSE-6 series repair droids - sometimes referred to as the mouse droid - are a small, box-shaped, wheeled general purpose MSE-series droid used for delivery and maintenance purposes. MSE-6 units were most notably found on Star Destroyers and both Death Stars during the time of the Galactic Empire. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey resin, they will require painting.
    Select options
  • Add to wishlist Quick view

    Carbon Freezing Chamber Floor

    £28.95 – £34.95
    This lasercut circular flooring panel comes from the Carbon Freezing chamber seen in the movies and is suitable for your 12th (6") or 18th scale (3.75") figure. Can be painted.
    • 12th scale = 400mm in diameter and 2mm thick cut from high grade MDF
    • 18th scale = 270mm in diameter and 2mm thick
    Select options
  • Add to wishlist Quick view

    Death Star Elevator Door Set

    £29.95 – £35.95
    This elevator door and surround section from the Death Star or Imperial Star Destroyer can be combined with the other Wall Section Sets to create a length of Imperial corridor. The Elevator is styled after the McQuarrie designs and can be added to your own custom diorama base to really enhance the final scene. The Door Section has been scaled for 12th toy or model figures (6") and is made up of 4 elements.
    • The Elevator Door is approximately 148mm wide x 180mm tall x 74mm deep at 6" scale
    • The Elevator Door is approximately 100mm wide x 124mm tall x 50mm deep at 3.75" scale
    • Available with or without the half curved pipe section for the door
    • Can be lit using LEDs in the top section
    Cast in high quality white or grey resin the Elevator Door Set will require assembly and painting. Decals provided.
    Select options
  • Add to wishlist Quick view

    Death Star Wall Panel Door Section

    £18.95
    This detailed Death Star Door opening set can be combined with the Wall Section Sets to create a number of Imperial Death Star walls - all approved by Darth Vader himself. The Door Section can be added to your own custom diorama base to really enhance the final scene. The Door Section has been scaled to fit either an 18th or 12th toy or model figure and is made up of 4 elements in each Panel Set. The Door Section is approximately 140mm x 180mm in size but there are 2 different height sections for scaling as you require. Cast in high quality white or grey resin the Door Section will require assembly and painting.
    Add to basket
  • Add to wishlist Quick view

    Death Star Wall Panel Sets

    £19.95 – £55.95
    These detailed wall panel sets can be combined to create a number of Imperial Death Star wall panels and are approved by Darth Vader himself. The panel sets can be added to your own custom diorama base to really enhance the final scene. The Panel Sets have been scaled to fit either an 18th or 12th toy or model figure. There are approximately 25 elements in each Panel Set. Each Panel Section covers approximately 180mm x 180mm surface area, and has been cast in high quality white or grey resin. Will require assembly and painting.
    Select options
  • Add to wishlist Quick view

    Wall Mounted Vent Ports (5-pack)

    £12.95
    A great set of 5 of wall-mounted vents as a valuable addition to your scale model kits or toy Star Wars diorama. There are 5 quality vent designs that can be added to your own custom diorama base to really enhance the final scene and comes with a slight surface texture to simulate rust. Each Vent has been printed in high quality grey ABS-like resin. Will require painting.
    • Vent 1- 19mm (W) x 44mm (H) x 7mm (D)
    • Vent 2 - 19mm x 30mm x 7mm
    • Vent 3 - 35m x 40mm x 7mm
    • Vent 4 - 53mm x 30mm x 7mm
    • Vent 5 - 30mm diameter by 6mm
    Add to basket
  • Add to wishlist Quick view

    7 SciFi Control Boxes and Vent Panels

    £13.95
    A collection of 7 custom control panels, vents and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    4 Imperial Wall Section – 1:12

    £12.95
    A collection of 4 custom wall tiles for a Star Wars Imperial diorama approved by Darth Vader himself in 1:12 scale to use as a valuable addition to your scale model kits or toy. The wall sections can be added to your own custom diorama base to really enhance the final scene. Each Tile is 45mm x 82mm in size and 5mm deep, and has been cast in high quality white or grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    8 Imperial Flooring Tiles

    £12.95 – £14.95
    A collection of 8 custom flooring tiles for a Star Wars Imperial diorama approved by Darth Vader himself in either 1:12 scale or 1:18th scale to use as a valuable addition to your scale model kits or toy. The flooring panels can be added to your own custom diorama base to really enhance the final scene. Each Tile 1:12th scale is 50mm x 50mm in size; at 18th scale this is 37mm square and has been printed in high quality ABS-like grey or black resin. Will require painting.
    Select options