My Cart (0 )
Droid (16)
-
Gonk BBQ
£26.95 – £30.95A perfect accompaniment to your Mos Eisley diorama scene, the GONK BBQ with fried Kreetle created a great centrepiece for your street scene. The BBQ comes in 9 parts and will need assembly and painting. The BBQ handle turns and you can even add lighting to the BBQ unit to add effects to the coals. Printed in ABS-like grey, the BBQ comes with a clear resin panel that can be lit.Select options -
V4-LO Light Droid
£18.95 – £24.95V4-LO is a GNK-series light droid who has been specially created by Janne Mällinen. The droid comes with an optional set of feet. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
EG-6 Gonk Power Droid
£18.95 – £24.95This EG-6 Gonk is a power droid specially created by Janne Mällinen. Printed in ABS-like grey, the droid comes in 3 parts and will require assembly and painting.Select options- 12th scale = approx. 90mm tall
- 18th scale = approx. 59mm tall
-
R2-F3 replacement dome for Bandai R2-D2 kit
£15.95This replacement R2-styled dome has been created to replace the standard 1:12 scale R2D2 or R2D5 dome from Bandai. R2 series astromech droids, also known as R2 units, are very popular series of astromech droids produced by Industrial Automaton. They are the most popular line of all the R-series and typically stand at around 1 meter in height, sported a distinctive domed head, they are programmed to perform a variety of tasks. The R2 series is a major success for Industrial Automaton, and many later models of astromech are based on the R2 series, though none have the same success. R2-F3 has standard sensor systems on it's dome allowing but has long-range communication abilities due to the increased capacity inside the unit. Printed in high quality grey ABS-like resin. the R2 head will require painting. Bandai kit is NOT included.Add to basket -
R2-GZ replacement dome for Bandai R2-D2 kit
£15.95This replacement R2-styled dome has been created to replace the standard 1:12 scale R2D2 or R2D5 dome from Bandai. R2 series astromech droids, also known as R2 units, are very popular series of astromech droids produced by Industrial Automaton. They are the most popular line of all the R-series and typically stand at around 1 meter in height, sported a distinctive domed head, they are programmed to perform a variety of tasks. The R2 series is a major success for Industrial Automaton, and many later models of astromech are based on the R2 series, though none have the same success. R2-BZ has an enhanced sensor unit on the dome allowing to to provide more accurate long-range scanning to pilots. Printed in high quality grey ABS-like resin. the R2 head will require painting. Bandai kit is NOT included.Add to basket -
VNT-4GE Power Droid
£18.95 – £24.95VNT-4G is a mini GNK-series power droid who has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid comes in 3 parts and will require assembly and painting.Select options- 12th scale = approx. 90mm tall
- 18th scale = approx. 59mm tall
-
Cleaning Droid
£18.95 – £24.95The Cleaning Droid has been specially created by Enis Hazen for Redflare Models whose purpose was to maintain cleanliness. During the reign of the Galactic Empire, cleaning droids cleaned the windows of some houses on Level 3204, including those of the apartment belonging to Anandra Milon's family. Printed in ABS-like grey, the droid will require painting.Select options -
DO-TY Power Droid
£18.95 – £24.95DO-TY is a GNK-series power droid who has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
DD-VO Power Droid
£18.95 – £24.95DD-VO is a GNK-series power droid from Star Wars and has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
Big Boy Power Droid
£18.95 – £24.95Big Boy is a GNK-series power droid from Star Wars and has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
GONKY Power Droid with toolbox
£18.95 – £24.95Gonky was a defective GNK-series power droid who served Clone Force 99 aboard the Marauder. As a defective unit, Gonky's power unit could not fully charge. The enhanced clone Omega used the droid as a cot for a brief time. Additionally, she spoke to Gonky on occasion, showing him her trooper doll. When the Marauder was boarded by enemy Zygerrians, Omega told the droid to hide, though he simply powered down. Omega tried to fix Gonky's power unit to allow him to charge fully, but Hunter told her it was no use since he was a defective unit. The young clone comforted Gonky by saying that they were all defective. During the Bad Batch's mission to Daro, Gonky provided extra power to the ship when it was attacked by Imperial V-wing starfighters, but when a second group of V-wings opened fire, Gonky short circuited. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
JV-P12 HVAC Droid
£17.95 – £21.95JV-P12 is a blue, box-shaped HVAC droid with two legs that was forced to work in the criminal Pyke Syndicate's spice mines on the planet Kessel during the reign of the Galactic Empire. In 10 BBY, JV-P12 was freed from slavery when its restraining bolt was removed during a slave revolt in the mines started by the droid L3-37. Once free, JV-P12 helped destroy the Pykes' equipment by stomping on the top of one of the control panels in the mine's control center. Printed in ABS-like grey resin, the droid will require assembly and painting.Select options -
TNK-3 Refrigeration Droid
£17.95 – £21.95The TNK-3 Refrigeration Droid is critical tool for planets like Tatooine where the twin suns are blazing hot and goods need to be kept cool whilst transporting. Manufactured by Lerrimore Droids, the TNK-3 is normally programmed to carry liquids or foodstuffs in its central core from one location to another, keeping them at a constant temperature to avoid spoiling the contents. Walking on two legs, the TNK-3 droid stands upright and has several sensors around its torso to maintain awareness in a busy town such as Mos Eisley. Printed in ABS-like grey resin, the TNK-3 droid will require assembly and painting.Select options -
2X-3KPR Servant Droid
£21.95 – £52.95The 2X-3KPR is an excellent servant droid manufactured by Lerrimore Droids. The 2X-3KPR is normally responsible for patrolling around the perimeter of a homestead, and is programmed to activate alarm sensors, security lights, and power fences. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey and clear resin, the SW-2X3KPR droid will require assembly and painting.Select options -
PLNK Power Droid
£18.95 – £24.95PLNK-series power droids, nicknamed "plunk droids" for their distinctive vocalizations, are four-legged power droids manufactured by Industrial Automaton during the Clone Wars. They function as containment and refueling units for liquid tibanna gas, which they equipped various starships and equipment with. Programmed with simple artificial intelligence so they can understand rudimentary commands, the droids serve the Republic Navy, working aboard Venator-class Star Destroyers; as well as the Confederacy of Independent Systems. They have a slow moving pace, weighed down by a heavy internal tibanna tank and generator. A single unit carries an internal pump for loading and discharging liquid tibanna through its externally mounted hose and nozzle. PLNK-series units are also used on Republic-affiliated worlds such as Coruscant, Rodia, and Mandalore. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey, the GNK droid will require assembly and painting. Does not come with hose.Select options -
Mouse Droids (2-Pack)
£7.95 – £8.95A set of 2 MSE-6 series repair droids - sometimes referred to as the mouse droid - are a small, box-shaped, wheeled general purpose MSE-series droid used for delivery and maintenance purposes. MSE-6 units were most notably found on Star Destroyers and both Death Stars during the time of the Galactic Empire. The droid has been specially created by Janne Mällinen. Printed in ABS-like grey resin, they will require painting.Select options