control (24)

Filter Close
View as
  • Add to wishlist Quick view

    9 Technical Control Panels

    £20.95 – £42.95
    A collection of 9 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)
    Select options
  • Add to wishlist Quick view

    20 Technical Control Panels

    £26.95 – £55.95
    A set of 20 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)
    Select options
  • Add to wishlist Quick view

    Payphone from Andor

    £10.95 – £28.95
    Created by Janne Mällinen, for both 12th scale and 18th scale figures, this reproduction Payphone from the Andor TV show, and makes a perfect accompaniment to your new Andor street diorama. It has been designed to be mounted on a wall. Printed in ABS-like grey resin, it will require painting.
    • 6th scale - 80mm tall x 50mm wide
    • 12th scale - 40mm tall x 25mm wide
    • 18th scale - 27mm tall x 17mm wide
    Select options
  • Add to wishlist Quick view

    Imperial Console with Decals

    £33.95 – £40.95
    Created by Enis Hazan, this Imperial Console unit is available in either 1:12 (6") or 1:18 (3.75") scale and comes with a set of waterslide decals for the screens. The unit is printed in high quality 3D ABS-like resin and will require painting.
    • 12th scale - 73mm (L) x 57mm (W) x 106mm (H)
    • 18th scale - 48mm (L) x 38mm (W) x 71mm (H)
    Select options
  • Add to wishlist Quick view

    Star Wars Grand Inquisitor Decals

    £9.50
    Set of Waterslide Decals for 1:12, 1:18 or 1:6 scale Star Wars figures and model kits based on the Obiwan Kenobi TV show featuring the Grand Inquisitor signet from Star Wars. Apply using water or decal solution and seal onto the model surface. Decals range in size from 8mm to 15mm.
    Add to basket
  • Add to wishlist Quick view

    Security Holo Pedestal with Hologram

    £28.95 – £35.95
    This Imperial holo pedestal with a large hologram is a perfect fit for your new Star Destroyer diorama. The pedestal has been created by Janne Mällinen and can be lit from inside the console using a small LED to make the screen glow. The Holo pedestal unit comes in 4 parts and will require assembly & painting. Printed in ABS-like grey resin with a frosted top screen and a large hologram figure or either Lord Vader, Emperor Palpatine or Master Yoda.
    • 85mm (H) x 70mm (L) x 63mm (W) at 12th scale
    Select options
  • Add to wishlist Quick view

    Glowing Sign (Large) with LED panel

    £15.95 – £31.95
    Ideal for your next Star Wars diorama, this Glowing building signage can be fitted with a LED Micropanel so that the sign is lit from within. The frame comes in two halves, and the LED panel fits inside, and once assembled can be mounted onto the wall of your diorama for atmospheric effects. 2 small pegs connect it to the wall of your building or diorama.
    • Approximately 125mm x 65mm x 30mm
    • Can be supplied with or without the LED Micropanel & resistor
    • Optional signs have been printed in high quality decal paper
    • Printed in grey ABS-like resin
    • Will require painting
    Select options
  • Add to wishlist Quick view

    Box Crate Waterslide Decals

    £10.95
    A sheet of professional waterslide decals with a number of unique designs and logo's for use on your diorama. Simple application for your model or figure – cut using a sharp blade and soak in water for about 30sec before applying to your model.
    • Design 1 - 100mm x 70mm sheet
    • Design 2 - 100mm x 50mm sheet
    Select options
  • Add to wishlist Quick view

    Vaporator Monitoring Station

    £14.95 – £55.95
    This detailed Vaporator monitoring station is perfectly suitable for both 12th scale (6") and 18th scale figures (3.75") but we also sell a 6th scale version for your bigger dioramas! A wall-mounted unit, it makes a perfect accompaniment to your Tatooine diorama. Printed in ABS-like grey resin, the station comes with decals. Will require assembly and painting.
    Select options
  • Add to wishlist Quick view

    Bay 94 Sign – 3-pack

    £8.95
    A pack of 3 set of Bay 94 signage wall plaques for your next Millennium Falcon Star Wars diorama. Straight from Tatooine, you get three panels of different sizes can be wall mounted. Comes with a slight surface texture to simulate stonework.
    • 65mm (W) by 56.5mm (W) by 4mm (D)
    • 43mm (W) by 37.5mm (W) by 2.7mm (D)
    • 30mm (W) by 26mm (W) by 2mm (D)
    Each sign has been printed in high quality grey ABS-like resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    Light Sconces 8-Pack

    £4.95
    This pack of 8 light sconces can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. There are two different designs in the pack (4 of each) and measure approximately 30mm x 9mm. Each panel has been printed in ABS-like grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    SciFi Circular Portal Hatch

    £8.95 – £9.95
    A brilliant addition to your next diorama - the Circular Portal Hatch has a high level of detail for your scale model kits dio. As seen at Batuu, Galaxy's Edge in Disneyland, this portal can either be wall or floor mounted. Comes with a surface texture to simulate rust and is approximately 60mm diameter by 10mm high at 12th scale. Printed in high quality grey ABS-like resin. Will require painting.
    Select options
  • Add to wishlist Quick view

    Sci-fi Light Fixture – Twin Pack

    £7.95
    A 2-pack set of wall-mounted light fixtures as a valuable addition to your scale model kits or toy Star Wars diorama. As seen at Batuu, Galaxy's Edge in Disneyland, you get two lighting fittings that can be wall mounted - and even drilled and lit - to really enhance your personal diorama scene. Comes with a slight surface texture to simulate rust and is approximately 28mm (W) by 18mm (W) by 15mm (D). Each light has been printed in high quality grey ABS-like resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    SciFi Anode Processor

    £4.95 – £5.95
    To add to your next diorama scene, the Anode Processor has been reproduced from accurate photos and is highly detailed. Printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Anode Processor Unit is typically wall-mounted, and measures approximately 60mm (L) x 40mm (D) x 25mm (H) at 12th scale, and will require painting.
    Select options
  • Add to wishlist Quick view

    SciFi Twin Displacement Compressor Panels

    £9.95 – £11.95
    To add to your next diorama scene, these twin Displacement Compressor Units are a set of highly detailed wall panels, and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Twin Compressor Units measures approximately 50mm (L) x 28mm (D) x 10mm (H) at 12th scale, and will require painting.
    Select options
  • Add to wishlist Quick view

    SciFi Capacitance Generator

    £8.95
    To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures approximately 50mm (L) x 35mm (D) x 10mm (H) at 12th scale, and will require painting.
    Select options
  • Add to wishlist Quick view

    SciFi Condenser Unit

    £9.95 – £11.95
    To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures 60mm (L) x 40mm (D) x 15mm (H) at 12th scale, and will require painting.
    Select options
  • Add to wishlist Quick view

    Death Star Control Panel 3-Pack

    £4.95 – £5.95
    This 3-pack custom wall control panels as seen on the Death Star in numerous Star Wars movies. The control panels can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. Panels are 15mm by 10mm. Each panel has been cast in high quality white or grey resin. Will require painting.
    Select options
  • Add to wishlist Quick view

    Galaxy Edge Wall Panels – Pack 3

    £13.95
    A collection of 10 custom wall units and control interface panel tiles as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. There are a number of wall units together with a keypad and wall power generator. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or control interfaces mounted on the wall. Each part has been printed in ABS-like grey resin. Will require painting.
    • 3 wall-mounted control computers
    • 1 Keypad
    • 2 Comms units
    • 1 wall power generator
    • 2 miscellaneous panels
    • 1 panel with a power switch
    Add to basket
  • Add to wishlist Quick view

    Galaxy Edge Wall Panels – Pack 2

    £14.95
    A collection of 9 custom wall units and control interface panel tiles as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. There are a number of wall units together with 2 keypads and wall lights. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.
    • 3 Wall Lights
    • 2 Keypads
    • 3 Main Block power units / panels
    • 1 miscellaneous greeblie
    Add to basket
  • Add to wishlist Quick view

    Galaxy Edge Wall Panels – Pack 1

    £13.95
    A collection of 7 custom wall panels and units as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. Often known as greeblies, the various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    7 SciFi Control Boxes and Vent Panels

    £13.95
    A collection of 7 custom control panels, vents and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    4 Imperial Wall Section – 1:12

    £12.95
    A collection of 4 custom wall tiles for a Star Wars Imperial diorama approved by Darth Vader himself in 1:12 scale to use as a valuable addition to your scale model kits or toy. The wall sections can be added to your own custom diorama base to really enhance the final scene. Each Tile is 45mm x 82mm in size and 5mm deep, and has been cast in high quality white or grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    Star Wars Control panels

    £10.95 – £15.95
    These 4 highly detailed wall panels can be a valuable addition to your own scale model kits or toy diorama and are fantastic when added to wall sections. Each panel comes in one part, and has been cast in high quality white or grey resin. Will require painting. There are 4 panels in the pack:
    • Large Panel with 3 hexagons - 45mm x 54mm @ 12th scale
    • Small Panel with 3 hexagons - 33mm x 40mm
    • Square Door Plate - 25mm x 25mm
    • Droid Control Panel - 25mm x 37mm
    Select options