1:18 scale (17)

Filter Close
View as
  • Quick view
    Select options Add to wishlist

    Galoomp Beast

    $20.95 – $24.95
    Named for the unique sound they made when foraging for food at dawn or dusk, Galoomps are large herbivores that are found on Naboo and Tatooine. Galoomps are, despite a reptilian appearance, are actually mammals and their nostril slits protected them against sand. Their tail knob, filled with loose pieces of cartilage, is shaken to warn of approaching danger. Once per year, a Galoomp would shed the bony rattle on its tail - the rattle was used to make toys for Gungan children. Printed from high quality ABS-like resin the model will need painting.
    • 65mm long by 40mm tall at 18th scale
    • 100mm long by 60mm tall at 12th scale
  • Quick view
    Add to basket Add to wishlist

    Mini Rubble Pile

    $5.95
    Add to your diorama with this small pile of rubble and machinery parts in 12th scale (6"). Printed from high quality ABS-like resin and the rubble will need painting.
  • Quick view
    Select options Add to wishlist

    Steelpecker Birds (Helmet)

    $25.95 – $28.95
    As an alternative scene, there are 2 Steelpecker birds at 12th scale (6") in different poses in this set along with a damaged Stormtrooper helmet. Steelpeckers are a non-sentient species of carrion bird native to the planet Jakku. The birds are very ragged and mangy in appearance, with scraggly black feathers. They have strong beaks and talons that were tipped with iron and sharpened on scrap. They feed mainly on metal, to which they were drawn by its magnetic signature. To digest the metal they consumed, Steelpeckers stored vanadium, osmiridium, and corundum in their gizzards. Named for their diet, these birds are very useful commodities to scavengers, who collected their carcasses and guano. Steelpickers were nocturnal. They are printed from high quality ABS-like resin and the models will need painting.
  • Quick view
    Select options Add to wishlist

    Steelpecker Birds (Rubble Pile)

    $22.95 – $30.95
    You get 3 Steelpecker birds at 12th scale (6") in different poses in this set. Available with or without a pile of rubble. Steelpeckers are a non-sentient species of carrion bird native to the planet Jakku. The birds are very ragged and mangy in appearance, with scraggly black feathers. They have strong beaks and talons that were tipped with iron and sharpened on scrap. They feed mainly on metal, to which they were drawn by its magnetic signature. To digest the metal they consumed, Steelpeckers stored vanadium, osmiridium, and corundum in their gizzards. Named for their diet, these birds are very useful commodities to scavengers, who collected their carcasses and guano. Steelpickers were nocturnal. They are printed from high quality ABS-like resin and the models will need painting.
  • Quick view
    Select options Add to wishlist

    Massiff Beast

    $15.95 – $45.95
    The Massiff is a reptilian species of dangerous hunters found on desert planets including Tatooine and Geonosis. Massiffs are domesticated for sentry and guard tasks, and used by the Tusken Raiders of Tatooine. A massiff is a squat quadruped with a row of spines along their humped backs - the size of the spines, which the reptiles used for defense, indicated a Massiff's age. As well as the spines giving them an extra level of defense, the creatures also had armored hides. Printed from high quality ABS-like resin the model will need painting. Scaled at 1:12, the Hound is 65mm tall.
  • Quick view
    Select options Add to wishlist

    Sci-fi Barrel

    $15.95
    Enhance your scale model kits or toy Star Wars diorama with this reproduction of a barrel from Galaxy's Edge in Disneyland, Florida. The barrel is printed in high quality 3D ABS-like resin and can be added to your own custom diorama base. Will require painting. Barrel size is approximately 117mm tall by 75mm diameter at 12th scale.
  • Quick view
    Select options Add to wishlist

    Cantina Drink Dispensers

    $28.95 – $36.95
    Create your favorite cantina scene from Star Wars with these sets of Cantina Drinks Dispensers and contains of liquid. Each set comes with the barrel frame, a lid and the liquid glass container with colored fluid inside. Available in either 1:18 scale or 1:12 scale in 3 parts, they have been 3D printed in ABS-like resin and the glass drink container has been cast in high quality clear resin with a random color tint. Will require assembly & painting.
    • Set A - x2 standard & x1 tall dispenser with 3 different lids designs and 3 colored containers
    • Set B - x1 standard, x1 tall dispenser & 1 solid dispenser with 2 different lids designs and 2 colored containers
    • Set C - x2 IG-88 dispensers & x1 solid dispenser
  • Quick view
    Add to basket Add to wishlist

    Jumptrooper Jetpack – 1:12 scale

    $25.95
    Jumptroopers, also known as Imperial Jump Troopers or rocket troopers, were specialized stormtroopers utilized by the Galactic Empire prior to and during the Galactic Civil War. Jumptroopers were equipped with jump packs or jetpacks that allowed them temporary flight. This highly-accurate backpack has been specially created by Janne Mällinen and can be fitted to your Bandai or Hoy Toys figure to enable them to be suspended in the air or maneuver through open space. This is suitable for a 12th scale (6") figure. Printed from high quality ABS-like resin, the model will need assembling & painting.
  • Quick view
    Select options Add to wishlist

    Death Star Control Panel 3-Pack

    $5.95 – $7.95
    This 3-pack custom wall control panels as seen on the Death Star in numerous Star Wars movies. The control panels can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. Panels are 15mm by 10mm. Each panel has been cast in high quality white or grey resin. Will require painting.
  • Quick view
    Select options Add to wishlist

    Round Spaceport Door and Carvings

    $22.50 – $75.95
    Based on one of the doorways at Batuu in Galaxy's Edge, Disney in Florida - this Star Wars doorway, frame and unique carving in 1:18 or 1:12 scales come in 15 parts to use as a valuable addition to your scale model kits or toy diorama! You can choose to order just the doors, the door and the main frame, the carvings only or everything! The two Doors, Frame and Carvings measures approximately 180mm (H) x 230mm (W) x 20m (D) at 1:18th scale. Cast in high quality white or grey resin. Will require assembly and painting.
  • Quick view
    Select options Add to wishlist

    SciFi Wall Radiator Panel

    $15.95
    This SciFi Radiator Panel can be add to your Star Wars diorama wall section - or any scifi diorama you may be creating. Designed in both 1:18 (3.75") and 1:12 scale (6") to use as a valuable addition to your scale Bandai model kits or Hot Toys figure. The Radiator Panel has been specially created by Janne Mällinen and comes in a single section. The Radiator is 165mm x 75mm by 10mm at 6" scale, and has been printed/cast in high quality ABS-like resin. Will require painting.
  • Quick view
    Select options Add to wishlist

    Shocktrooper Backpack

    $22.95 – $25.95
    The Shocktrooper backpack will fit a standard Hot Toys or Bandai model kit, and make a great compliment to your Star Wars diorama! The highly-accurate backpack has been specially created by Janne Mällinen based on the specialised infantry of the Alliance to restore the Republic and New Republic. During the Galactic Civil War, Shocktroopers were deployed to hunt down Imperial warlords and following the New Republic's formation, they were made into peacekeepers who escorted delegates and suppressed riots. Printed from high quality ABS-like resin the model will need painting.
  • Quick view
    Select options Add to wishlist

    Z-6 Rotary Blaster Weapon

    $18.95
    Designed for your Bandai or Hot Toys figure, the Z-6 Rotary Blaster weapon was first seen in the Clone Wars movie, and has scaled for your figures. The Rotary Blaster is a highly-accurate weapon and has been specially created by Janne Mällinen. It has been printed from high quality ABS-like resin. The blaster will need painting.
  • Quick view
    Select options Add to wishlist

    Corellian Hound

    $14.95 – $45.95
    Corellian hounds, also known as Sibian hounds, were a type of hound from the planet Corellia. They were quick and nimble canines used by locals for a number of tasks. Due to their keen sense of smell, they were often used for hunting and tracking. They had a vicious bark and bite, which meant they could be quite effective for protection. Criminal gangs were fond of using the hounds for defense or to attack their rivals. They also had regenerating teeth. Corellian hounds could also be found on the planet Ushruu, where they were known as Snarlers. Printed from high quality ABS-like resin the model will need painting.
    • Scaled at 1:12, the Hound is 84mm tall
    • At 1:18 scale, the Hound is 56mm tall
    • Legion scale (32mm), the Hound is 20.5mm tall
  • Quick view
    Select options Add to wishlist

    Wyyyschokk Spider

    $20.95 – $24.95
    Wyyyschokk are a species of spider that lived on the planet Kashyyyk. They are highly intelligent and extremely hostile, and can ensnare prey by casting webbing at them from a distance, and would often wait to ambush their prey by attacking them from above or below. A notable subspecies was the Albino Wyyyschokk. Their eggs were used for a cake named Kashyyyk cake. Wyyyschokk were a large species of spider native to the planet Kashyyyk. Wyyyschokk were highly intelligent and hostile to most sentient lifeforms. They were capable of launching a web-like enzyme from their mandibles. Printed from high quality ABS-like resin the model will need some assembly and painting.
  • Quick view
    Select options Add to wishlist

    Buboicullaar

    $32.95 – $37.95
    Buboicullaar, or Bubo for short, was a male frog-dog that was kept in Jabba's Palace by Jabba the Hutt. He was often looked over as being unintelligent, but was surprisingly smarter than many of Jabba's thugs. He once ate a detonation link needed for a bomb, foiling an attempt to assassinate Jabba. Ree-Yees, a Gran, had the task of looking after the creature! Made from high quality ABS-like resin the model will need painting.
  • Quick view
    Select options Add to wishlist

    Dianoga Eyestalk critter

    $15.95 – $21.95
    The Dianoga is a sentient, carnivorous cephalopod creature which possessed multiple hearts, seven suckered tentacles, and a single eyestalk that protrudes from the center of their bodies. The typically have purple skin that can change color to match their surroundings, and a green eye with red sclera. The creature stands an impressive 10 meters tall but typically resides in a watery habitat. This 3D printed model of the Dianoga's eyestalk and neck is ideal for your Dagobah scene, or where you want to show an ominous presence behind your toy figures. Made from high quality ABS-like resin the model will need painting.
    • Approximately 50mm tall at 1:18 scale
    • Approximately 75mm to 80mm tall at 1:12 scale
    • Approximately 95mm to 100mm at 1:6 scale